| 详细说明 |
 |
| 特点：
1.双层式设计，可分开控制楦头与大底的温度，适用于各种不同材质之大底鞋面，且提高接着力30%以上；
2.热风对流系统，可节省楦头及空间；
3.多点温度感应，使烘箱温度平均且没有温差之情形。
4.快速輸送帶，它是將貼底好的鞋子接傳送到壓底操作手，以避免鞋子降溫。
5.貼底溫箱，它可持一定溫度在貼底段，以確保貼底時達到最佳貼合效果。
6.人體工學設計，可節省人力和增加產量。
7.提供特別的熱循環方式，處理不同組合之膠水或水性膠。
Features:
1.Two-layer design separates and controls temperature of last and outsole, increasing bond strength up to 30%.
2.Heat-Wind Convection System uses intense wind and heat to treat materials. This allows for reduced space requirements and also results in higher quality of treated materials.
3.Drying chamber air temperature and conveyor speed adjustable to suit requirements. Drying chambers equipped with temperature sensors to keep temperatures constant.
4.A Rapid Transit Device is used to transport the sole and shoe directly to the soles pres operator quickly, preventing premature cooling.
5.Constant temperature is maintained by a heater, which runs the entire length of the unloading section, ensuring that spotting takes place with the shoe and sole |
|
提醒：发布者在 发表了这条信息。(注：由系统自动检测得出的结论，仅供参考。)